The (SLS) stop light switch is above the brake pedal. Below the top pivot point of the brake pedal lever you will see a rod that goes from the brake pedal lever and continues to the brake booster. The SLS sits partially atop this rod.
Removal procedure:
1. Disconnect battery
2. Disable SIR-supplemental inflatable restraint system.(this is done to avoid accidental deployment of the air bag) I usually don't do this step myself but it seems every time you work on something electrical they want this done but anyway I included the step so use your own judgement.
3. Rmove the pushrod retainer from the brake pedal pin. Use snap ring pliers.
4. Unsnap the SLS from the pushrod.
5. Disconnect the electrical connector from the SLS
Install:
1. connect elect..connector to the SLS
2.Snap the SLS onto the pushrod.
3. install the pushrod retainer onto the brake pedal pin.
(use a 11mm or a 7/16 socket to push a new clip onto the brake pedal pin)
4. reconnect battery.
Welcome New User! ( Create Account | Sign In )
Question
Submitted 617 days ago...
Answers
Awarded Answer (What’s This?)
Answer 1 / 1 - Submitted 616 days ago...
This Question was awarded 616 days ago therefore you can no longer post an Answer. However you may post a comment below.
Add A Comment
Related Questions
Overview |
FAQs |
Contact Us |
Member Agreement |
Privacy Policy |
Site Map |
Partners
Copyright © WebAnswers 2009. All rights reserved.
