Hi. I have a 2005 Pontiac G6. I cant get the driver side headlight out.I have 2 top bolts and a plastic plug out of the grill. What else is holding it

You problly dont have to take the whole headlight out to change the bulb , should just be a cover over the bulb at the back of the light , take it off and turn the bulb a half turn and it comes out , becarful not to touch the glass part of the new bulb with your fingers it will cause it to blow when you turn it on , just handle the plastic part

Thanks Rick. That is how most head lights come out but there is no room behind on this car. Great GM engineering. I need to get the whole head light set to move foward to get access. Still stuck!

Thanks Spout. I almost thought I had it but the light still wont let go at the fender. I lifted fairly hard, I dont want to break anything. Have you removed one this way before?

2005 Pontiac G6.I got the head light out! Spout396s procedure was correct except #4, the light pulls straight out from fender. It is held on by a thinguhmajig. A metal bolt that plugs into a plastic socket. I had to pull the light out at the other end, as much as possible,and spray some oil on the retainer (thinguhmajig) to free it up.Let the oil penetrate for a while. You can't pull to hard because the plastic socket is mounted in a thin metal strip inside the fender,it doesn't seem to sturdy.I didn't have to disconnet any wiring, just open the plastic cover on back to get at bulbs.Props to my brother-inlaw,he has seen these connectors on other vehicle headlights.Hope this helps any other DIYers.Thanks again to Spout396 & Rick.

Good Job Bagger congrats WOOOOOOO HOOOOOOOOO !
glad you got it out ,
Give Spout credit for the best answer by clicking best answer button by his answer ,If you feel it was the best answer ,have a great day and come back to see us

Thanks Rick

Good descriptive procedure. Headlamp assemble pulls staight out on this year and model.

I have a pontiac g-6 2006 i can not seem to take the plastic cover off to change the burnt out bulb