The 05 Sonata rotor just slides onto the hub. Normally the rotor would easily pull off after removing the 2 screws but a few years of rust seizes them to the hub. I have serviced Hyundai products for 12 years and have found that the only course of action is to use as large a hammer as you can swing at the inside surface of the rotor to knock it loose.
Welcome New User! ( Create Account | Sign In )
| You are here: Home Categories Autos & Transportation Rotor removal from Hyundai Sonata 05 |
This Question has not been awarded yet.
Question
Submitted 684 days ago...
Rotor removal from Hyundai Sonata 05
How do you tell if the rotor is "press" on? I am doing a 5oK brake job and wanted to have the rotors turned. I removed 2 screws from the face of the rotor but have had not luck pulling the rotor off. I also used a block of wood and hammer to tap from the back side. I this just a case of a like rust or does the hole wheel/bearing assembly need to get removed to pull the rotor?
Answers
Answer This Question Now
Rotor removal from Hyundai Sonata 05
If your Answer is chosen as the “accepted” answer, you will earn ongoing royalties on
this thread.
Simply type your Answer in the box below and post your answer.
Related Questions
Overview |
FAQs |
Contact Us |
Member Agreement |
Privacy Policy |
Site Map |
Partners
Copyright © WebAnswers 2010. All rights reserved.