Welcome New User! ( Create Account | Sign In )

Our members earned over $6,000.00 last month! Join Us

Start earning today!

 
Congratulations!
kbky11

kbky11

Brain (12,547)

kbky11 answer was awarded and will earn ongoing royalties from this thread.

How This Works?

 
Question

Submitted 544 days ago...

Ponts40

Ponts40

New User (4)

Massey Furgeson Power Steering

I have just purchased a 1963 TO 35 from an uncle who bought it new. I was told there are several diffferent filters for the power steering reservoir and to look at it before ordering one. I pulled out a wire mesh circular strainer but that was all that was in the unit. I cleaned it out with carb cleaner but it does not feel like it wants to go back and since I did it with a full reservoir I did not look at it before I pulled it out. I finally cleaned the container out so I can see and I still do not see what holds it in and am afraid to force it. I did take pictures that I can use to illustrate it. Also My uncle said he used 15 W 40 in it but I notice the owners manual says 20-20. Any suggestins on what to use?

Share | Abuse |
 
Answers
Answer 1 / 3 - Submitted 543 days ago...

kbky11

kbky11

Brain (12,547)

Really use any good oil in it, it will not make any diff, 15 w 40 is a little heavy , id go for 10 w 30 and it will do the same job , just not be as heavy in real cold weather, and take your hand and kinda hit the wire mesh circular strainer , after lining it up with the small indents on the inside, on the wall of the power steering reservoir , it should go

Share | Link | Abuse
 
 
Answer 2 / 3 - Submitted 543 days ago...

Ponts40

Ponts40

New User (4)

Thanks. I cleaned the unit out and pressed it down hard. I didn't notice detents but it seemed to work. I'm a little nervous about it but when I change oil again I'll do the same routine and look. Thanks for tip on oil. I then had problem getting filter cartridge from NAPA. I got the wrong one (bolt hole too small) so I went on line and ordered the spin on adapter to solve that in the future.

Share | Link | Abuse
 
 

Awarded Answer (What’s This?)

Answer 3 / 3 - Submitted 542 days ago...

kbky11

kbky11

Brain (12,547)

Glad i could help

 

This Question was awarded 539 days ago therefore you can no longer post an Answer. However you may post a comment below.

 
Comments
Comment 1 / 3 - Submitted 539 days ago...

Ponts40

Ponts40

New User (4)

The answer gave me the confidence that I was able to take care of the tractor that I bought from an uncle that bought it new

Share | Link | Abuse
 
 
Comment 2 / 3 - Submitted 538 days ago...

kbky11

kbky11

Brain (12,547)

Hi again , thses old tractors are the best things made in the old days, you could use a lot of diff oils and stuff, in them , because the older people couldnt always get name brand out of the genarel stores back then , and they knew, that they would use what they could find, but they dont make them that away any more, blocks are so thin , they run so hot, and hoses, are made cheaper, evey thing on a new tractor is made, cheap , and older is better, so if you have another ? let us know and we will try to help

Share | Link | Abuse
 
 
Comment 3 / 3 - Submitted 538 days ago...

Ponts40

Ponts40

New User (4)

My uncle also had a John Deer but his brother had a dozer service. They still worked the family farm that there parents had. Dozer service garage was just 1/4 mile from the building Massy was housed in. I imagine they bought oil by the 30 gallon drum and that may be why he used 15W 40. As I said the owners manual says 20/20 but you don't see that anymore. What i am trying to be careful with is oil for flat tappet motors. Have you seen the research from Fils Auto Corner Oil Fact V 1.2? if not I'll send it to you. I just installed the spin on adapter today. Works fine. Boxed up the old canister & last (drained) filter for future references.

Share | Link | Abuse
 
 
 
 
 

Add A Comment

Email Subscriptions
Author adds clarification
All new responses

Related Questions